Locksmith

Locksmith

Josh-the-Locksmith

25 Years Experience

Austin, TX

Male, 46

I've been a locksmith since 1998. I did automotive residential & commercial work from 1998 to 2008. From 2008 to 2018, I did some residential, but mostly commercial work. I have been project managing & estimating since 2018. I used to locksmith in the Chicago area, now the Austin area.

SubscribeGet emails when new questions are answered. Ask Me Anything!Show Bio +

Share:

Ask me anything!

Submit Your Question

329 Questions

Share:

Last Answer on June 11, 2024

Best Rated

I have a Jimmy Deadbolt lock. The screws that attach and hold it against the door seem to be starting to pull free, they won't tighten up. It doesn't make sense to replace it. Is there a plate for the key side that the screws can go into or anything?

Asked by Mark Trombetta almost 6 years ago

Take some wood shims, or cut some little pieces of wood, or some wood toothpicks and put them in the screw holes. Then put the screws back in. That should allow you to tighten up your screws.

Does anyone try and call you for non lock needs?

Asked by Jim about 5 years ago

Well I haven’t had to answer the phone in over 10 years, but yes, we would get some weird random requests now & then. Seems like they just didn’t pay attention to who they were calling. One time I received a call around midnight from a girl locked out of her car at a hotel. When I told her how much it would be, since she didn’t ask & I didn’t want her to be surprised, she was shocked to find out that we charged for our service, & canceled. ???????????????

I ja e a la gard group 2 1548 that no matter how I turn it or how many time i only have to turn it to one number to the left and than to the right to open the safe. Why?

Asked by Jc barker almost 5 years ago

Sounds like it needs to be reset. Either it needs to be repaired, which is doubtful unless it was abused, or the combination was improperly set to begin with.

What made you want to become a lock smith?

Asked by Hendrickson about 5 years ago

My uncle is a locksmith. He was looking for part time help, & I was looking for a job change. I really had no interest in it otherwise. I was 20. 22 years later, here I am.

Hi, I have a 2002 Ford Explorer and my daughters have managed to lose both my original keys and alarm remotes. I don't know where to start and need the cheapest way to get this done. Thank You!

Asked by Debbie over 5 years ago

Check you manual for a key code written in by the dealer or a previous owner. It’s rare, but it happens. Then I would get a price from a few local locksmiths & the Ford dealer. You can probably get an operating key. If you’re concerned about price, you might have to put the remote on the back burner.

What is the purpose of a spacer or a guide key?

Asked by De La Rosa over 5 years ago

Sorry I’m not familiar with either of those terms in reference to key machines. Maybe it’s used on a type of key cutting machine I’ve never used before. ¯\_(?)_/¯

Someone has made an impression of my key to my car. How do you do this and I have an odd question. If I seize the lock up with super glue will keyless remote still work? I have replaced the locks and it was not cheap. I can’t replace them again.

Asked by Pz about 5 years ago

Why would someone want to do that unless they planned to steal your car? And they would also have to program the key unless your car doesn’t have a chip in it, but most do these days. That sounds very unlikely. That’s a lot of trouble to go through when they could just break a window if they were just looking to steal misc items in the car. Technically yes your remote would still work if you had superglue in your cylinders. If you ever plan on selling the car, I would highly advise against that tactic though. You might be better off going to a locksmith & asking him to break some keys off in your doors. At least that way you could get them pulled back out down the road & reuse your locks.